Procedimentos realizados com Sucesso com UMT !!!

[Bruno Santana]

xiaomi mi mix (lithium) frp e conta mi 

Operation    : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.0.3
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00500 [8996] 00000000
OPK_DATA    : 65D680382C4E0091ED2A1DDCD7EFD99ED328BEBDAD748E5CE177EC5AB6544AE5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_004]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, UFS, Unknown
LU Count    : 6 [0x03A77800] [0x00000400] [0x00000400] [0x00008000] [0x00114000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi MIX [msm8996]
Software    : OPR1.170623.032, V10.0.1.0.OAHMIFH [Fri Aug 31 17:37:35 CST 2018]
Android Ver.    : 8.0.0
Patch Level    : 2018-08-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 3.3

Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.0.3
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1F00500 [8996] 00000000
OPK_DATA    : 65D680382C4E0091ED2A1DDCD7EFD99ED328BEBDAD748E5CE177EC5AB6544AE5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_004]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, UFS, Unknown
LU Count    : 6 [0x03A77800] [0x00000400] [0x00000400] [0x00008000] [0x00114000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi MIX [msm8996]
Software    : OPR1.170623.032, V10.0.1.0.OAHMIFH [Fri Aug 31 17:37:35 CST 2018]
Android Ver.    : 8.0.0
Patch Level    : 2018-08-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 3.3

[russao]

RESET FRP ASUS ZBKL:

 

[russao]

Agora, russao disse:

RESET FRP ASUS ZBKL:

 

Device    : ASUS ZB602KL (X00TD)
Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM173)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00400 [8937] 39A21620
OPK_DATA    : FDB379775FEB07C551EFBC01F78CD6ABAC99A2829E6F63768E4491B32485B6E5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_015]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8937, eMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : asus ASUS_X017D [msm8937]
Software    : NMF26F.WW_Phone-14.0400.1807.056-20180809, WW_Phone-14.0400.1807.056-20180809 [Thu Aug  9 09:55:10 CST 2018]
Android Ver.    : 7.1.1
Patch Level    : 2018-07-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 3.3

[Bruno Santana]

reset frp j730g android 8.1 binary 5 

 

 

 

Editado Novembro 26, 2018 por Bruno Santana

[Tomato]

Frp G531H Done, Deu erro na Octoplus, 

Frp Reset (New Method) deu log de Ok porém só ativou depuração USB.

Com a depuração ativada só dar reset no ADB Mode e desativar OEM.

 

[Bruno Santana]

reset frp j700m 

 

[nengo]

frp xt 1603

[Emilio cell PE]

FRP SM-A520F

[Emilio cell PE]

Em 24/11/2018 em 17:17, Emilio cell PE disse:

FRP ONEPLUS

 

[nengo]

frp xt 1672

[nengo]

frp xt1544

[nengo]

frp moto xplay

[Bruno Santana]

root j710mn done 

com a firmware vc cria a root e roda 
100% testada 

 

[rafa81]

FRP XT1644

[Reginaldo almeida]

FRP Removido com sucesso LG LM-X410BCW  Android 7.1.2   Segurança do patch 1 de setembro de 2018

Lg K11+  reset FRP done

[Reginaldo almeida]

Flash room celular LG K430tv  K10 feita com sucesso , celular não mostrava nada na tela não rodou flash com flashtool , UMT foi 100%
OBS: não mostrava nada na tela mas com cabo optimus reconmheceu no gerenciador ..

flash usada Aqui : https://www.clansoft.net/dl/index.php?a=downloads&b=search&in=&keyword=430tv

[rafa81]

FRP XT1802 MOTO G5S Plus

[rafa81]

FRP XT1543

[Bruno Santana]

g950f frp done 

[Tomato]

FRP Alcatel Pixi 4 5010e - 

[nengo]

frp xt1900

[William Ferreira]

Frp Motorola One 9.0 Android Pie 

 

Port    : Fastboot Inteface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1941-3
Boot Ver.    : MBM-2.1-deen_retail-65423a4-181106
Baseband    : M8953_15.11.02.17R DEEN_LATAMDSDS_CUST
Software    : Blur_Version.29.21.11.deen.retail.en.US
IMEI    : 359521091103152
CPU    : MSM8953
RAM    : 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
EMMC    : 64GB SAMSUNG RH64AB RV=08 PV=05 FV=0000000000000005
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model    : motorola one
Bootloader    : 0xC40A
Baseband    : M8953_15.11.02.17R DEEN_LATAMDSDS_CUST
Build    : Blur_Version.29.21.11.deen.retail.en.US
Android    : 9
Searching Network Interface... Found
Connecting to device... OK
Model    : motorola one
Bootloader    : 0xC40A
Baseband    : M8953_15.11.02.17R DEEN_LATAMDSDS_CUST
Build    : Blur_Version.29.21.11.deen.retail.en.US
Android    : 9
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 02:55
[Module Ver. 5.2]
Log Saved to Logs\181221_184029.log

[rafa81]

FRP XT1944-4 Moto E5

[rafa81]

FRP XT1750 Moto C

[djdiogope]

Moto G6 Frp 8.0.0

Port    : Fastboot Inteface
Baud Rate    : Not Applicable
Device    : Motorola
Operation    : New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1925-3
Boot Ver.    : moto-sdm450-C3.0C
Baseband    : M450_08.14.10.61R ALI_BRAZILDSDS_CUST
Software    : Blur_Version.27.251.6.ali.retail.en.US
IMEI    : 351869090682033
CPU    : SDM450
RAM    : 3GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
EMMC    : 32GB SAMSUNG GX6BMB RV=08 PV=03 FV=0000000000000003
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model    : moto g(6)
Bootloader    : 0xC30C
Baseband    : M450_08.14.10.61R ALI_BRAZILDSDS_CUST
Build    : Blur_Version.27.251.6.ali.retail.en.US
Android    : 8.0.0
Searching Network Interface... Found
Connecting to device... OK
Model    : moto g(6)
Bootloader    : 0xC30C
Baseband    : M450_08.14.10.61R ALI_BRAZILDSDS_CUST
Build    : Blur_Version.27.251.6.ali.retail.en.US
Android    : 8.0.0
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 03:13
[Module Ver. 5.2]
Log Saved to Logs\181224_141410.log