Procedimentos realizados com Sucesso com UMT !!!

[Bruno Santana]

19 horas atrás, Edinilson Souza disse:

Com a umt consigo remover senha padrão moto g8 sem perder os dados ?

nao 

[Bruno Santana]

reset frp moto e6s 
xt2053-2

 

[Bruno Santana]

software xiaomi note 9 pro max feito 

 

[Bruno Santana]

reset senha 
reset conta google 
tectoy on 128gb 
segurar volume -

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM82 [MediaTek USB Port (COM82)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&df2ee03&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: True] [DA Auth: True]
MEID: 1ADFB1C16753D60C776D81A546AE8E42
Preparing device...
-- Success!
Preloader saved as : preloader_k62v1_64_bsp_220406_152930.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM82)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Wed Aug 12 00:04:39 CST 2020
Build Flavor : full_k62v1_64_bsp-user
Build Desc. : full_k62v1_64_bsp-user 10 QP1A.190711.020 v4F4T-0 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2020-08-05
Platform : MT6765
Board : MT6765
Platform : mt6765
Userdata is ENCRYPTED
Erasing Userdata...
- Success!
Seeking FRP Data...
Resetting FRP...
- Success!
Formatting NVRAM...
- Success!
Formatting NVDATA...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.0]
 

[Bruno Santana]

reset frp xiaomi redmi 9 

 

 

[Bruno Santana]

xiaomi redmi note 10 - mojito
reset mi acc 

reset frp 

 

[bryanfellipe]

Brand : Positivo
Model : Twist Mini (S431)
Operation : Reset FRP
Connection Mode : Preloader
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM7)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Brand : positivo
Manufacturer : Positivo
Model : Twist Mini
Prod. Name : S431
Device : S431
Build Date : Wed Aug 14 09:46:52 -03 2019
Build Flavor : full_k80hd_bsp_fwv_512m-user
Build Desc. : full_k80hd_bsp_fwv_512m-user 8.1.0 O11019 URBR2019081401 release-keys
Platform : mt6580
Android Ver. : 8.1.0
Display ID : S431.BR.OPEN.2019081401
Patch Level : 2019-08-05
Model : Twist Mini
Board : k80hd_bsp_fwv_512m
Platform : mt6580
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.9]

[Bruno Santana]

reset frp samsung j8 feito 
com apenas 1 click 

top top 
 

[Bruno Santana]

reset frp tablet multilaser m7 3g plus 
mt8321a

[Jaylsonn]

boa tarde meu amigo, o senhor sabe informar se a umt pro faz a remoçao da conta mi do redmi note 9s usando creditos se o senhor ja fez e obtive exido 

[Aldinei Jose]

47 minutos atrás, Jaylsonn disse:

boa tarde meu amigo, o senhor sabe informar se a umt pro faz a remoçao da conta mi do redmi note 9s usando creditos se o senhor ja fez e obtive exido 

este modelo do faz via servidor 

[Bruno Santana]

3 horas atrás, Jaylsonn disse:

boa tarde meu amigo, o senhor sabe informar se a umt pro faz a remoçao da conta mi do redmi note 9s usando creditos se o senhor ja fez e obtive exido 

servido da umt ta off ja tem uns 60 dias 
e sem previsao de voltar 
mas quando voltar faz sim 

[Bruno Santana]

philco hit p10 
reset senha 
reset frp 
 

[Bruno Santana]

sofware feito xiaomi note 11 (spes)

Operation    : Multi Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM40)
Driver Info    : Lenovo Inc., leusbser.sys, 2.0.9.6
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1801B00 [E1801B00] 00007200
OPK_DATA    : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE1D25A7B0472DD7
Initializing Protocol...OK
Sending Loader [prog_firehose_ddr.elf]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...Failed
Error Log    : PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiID8+CjxkYXRhPgo8bG9nIHZhbHVlPSJFUlJPUjogU2lnbmF0dXJlIFZlcmlmaWNhdGlvbiBGYWlsZWQuIiAvPjwvZGF0YT48P3htbCB2ZXJzaW9uPSIxLjAiIGVuY29kaW5nPSJVVEYtOCIgPz4KPGRhdGE+CjxyZXNwb25zZSB2YWx1ZT0iTkFLIiByYXdtb2RlPSJmYWxzZSIgLz48L2RhdGE+
Reading Auth Blob...OK
Blob    : NDE1MTQxNDE0MTQxNTk0MzQxNDE0MzQ5NzAzMDYyNzY0MzYyNkIzNjQ1NTg2RTQxNTQ1RjRFNDQ2ODZGNzY0NjM1MzA2NjM1NDE0MT==
Requesting UMT Server for Auth Data...OK
Credits Left: 15
Authenticating...OK
Detecting Storage Type...OK
Hardware    : E1801B00, UFS, 128 GB
LU Count    : 6 [0x01C45800] [0x00000800] [0x00000800] [0x00002000] [0x00180000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi
Software    : , V13.0.12.0.RGCMIXM [Fri May 13 11:54:20 CST 2022]
Android Ver.    : 11
Patch Level    : 2022-05-01
Processing [rawprogram0.xml]
Writing [persist.img] -> [persist] ...Done
Writing [cust.img ] -> [cust]...Done
Writing [super.img ] -> [super]...Done
Writing [vbmeta_system.img] -> [vbmeta_system_a] ...Done
Writing [vbmeta_system.img] -> [vbmeta_system_b] ...Done
Writing [metadata.img ] -> [metadata]...Done
Writing [rescue.img ] -> [rescue]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram1.xml]
Writing [xbl.elf] -> [xbl_a] ...Done
Writing [xbl_config.elf] -> [xbl_config_a] ...Done
Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram2.xml]
Writing [xbl.elf] -> [xbl_b] ...Done
Writing [xbl_config.elf] -> [xbl_config_b] ...Done
Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram3.xml]
Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram4.xml]
Writing [rpm.mbn] -> [rpm_a] ...Done
Writing [tz.mbn] -> [tz_a] ...Done
Writing [hyp.mbn] -> [hyp_a] ...Done
Writing [NON-HLOS.bin] -> [modem_a] ...Done
Writing [BTFM.bin] -> [bluetooth_a] ...Done
Writing [abl.elf] -> [abl_a] ...Done
Writing [dspso.bin] -> [dsp_a] ...Done
Writing [km41.mbn] -> [keymaster_a] ...Done
Writing [boot.img] -> [boot_a] ...Done
Writing [devcfg.mbn] -> [devcfg_a] ...Done
Writing [qupv3fw.elf] -> [qupfw_a] ...Done
Writing [vbmeta.img] -> [vbmeta_a] ...Done
Writing [dtbo.img] -> [dtbo_a] ...Done
Writing [imagefv.elf] -> [imagefv_a] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp_a] ...Done
Writing [vendor_boot.img] -> [vendor_boot_a] ...Done
Writing [featenabler.mbn] -> [featenabler_a] ...Done
Writing [config.bin] -> [multiimgoem_a] ...Done
Writing [rpm.mbn] -> [rpm_b] ...Done
Writing [tz.mbn] -> [tz_b] ...Done
Writing [hyp.mbn] -> [hyp_b] ...Done
Writing [NON-HLOS.bin] -> [modem_b] ...Done
Writing [BTFM.bin] -> [bluetooth_b] ...Done
Writing [abl.elf] -> [abl_b] ...Done
Writing [dspso.bin] -> [dsp_b] ...Done
Writing [km41.mbn] -> [keymaster_b] ...Done
Writing [boot.img] -> [boot_b] ...Done
Writing [devcfg.mbn] -> [devcfg_b] ...Done
Writing [qupv3fw.elf] -> [qupfw_b] ...Done
Writing [vbmeta.img] -> [vbmeta_b] ...Done
Writing [dtbo.img] -> [dtbo_b] ...Done
Writing [featenabler.mbn] -> [featenabler_b] ...Done
Writing [imagefv.elf] -> [imagefv_b] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp_b] ...Done
Writing [config.bin] -> [multiimgoem_b] ...Done
Writing [logfs_ufs_8mb.bin] -> [logfs] ...Done
Writing [storsec.mbn] -> [storsec] ...Done
Writing [gpt_main4.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup4.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram5.xml]
Writing [gpt_main5.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup5.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 1...Done
Reading Partition Table...OK
Resetting FRP Lock.......Done
Resetting device...Done
Operation Finished.
QcFire Ver. 8.0

[Bruno Santana]

reset frp philco hit max ls039e 

 

[Bruno Santana]

reset senha 
reset frp 
mltilaser ms107 
multilaser g max 

 

[Bruno Santana]

reset frp moto e7 power

segura volume para cima e botao google assistente
 

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM43 [MediaTek USB Port (COM43)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&df2ee03&0&5#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: 23DB68E2D89FECE48A2464976F3AE1DD
Preparing device...
-- Success!
Preloader saved as : preloader_malta_221021_100736.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM43)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Build Date : Mon Jul 11 18:15:08 CST 2022
Build Flavor : malta-user
Build Desc. : malta-user 10 QOLS30.288-52-6 a0694 release-keys
Android Ver. : 10
Display ID : QOLS30.288-52-6 release-keys
Patch Level : 2022-07-05
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.1]

[Bruno Santana]

reset conta mi xiaomi note 10 em sideload
nao preisa abrir o telefone 

nao precisa test point 

 

[Bruno Santana]

reset frp xiaomi redmi note 11 
sem abrir 
sem test point 
sem gasta credito 
 

[Bruno Santana]

reset conta mi xiaomi note 8 
metodo sideload 

 

[Bruno Santana]

software xiaomi note 11 feito 

telefone so reiniciava 
problema resolvido 
 

[Bruno Santana]

reset frp multilaser s105 
multilaser f 

Phone Storage: EMMC
EXE: Ultimate Unisoc Module v0.1
SELECTED: SC7731E_EMMC_GENERIC
ACTION: Erase FRP
Loader format:NEW
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM23)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TBYG11_16_4_21
***************
[S]Manufacturer: Multilaser
[S]Brand: Multilaser
[S]Device: Multilaser_F_A10
[S]Model: Multilaser_F
Build ID: QP1A.190711.020
CPU arhitecture: armeabi-v7a
Hardware: sc7731e_1h10_v1.1.0
Hardware version: SC7731e_2_IRD_K_V1.1.0
Build product name: k211
Build description: k211-user 10 QP1A.190711.020 1621308331 release-keys
Build Id: QP1A.190711.020
Android Release: 10
Android Version: ML-TI-MSF.V4_20210518
Security patch: 2021-05-05
This phone have frp partition.
Removing frp, wait...
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\Saved_Logs\ML-TI-MSF.V4_20210518_erase_frp.txt
Total Time: 00:00:23
Done.

[Bruno Santana]

reset frp moto g8 power lite 
xt2055-2

 

 

[Bruno Santana]

novo metodo de roda firmware xiaomi pela umt 

aqui estou fazendo sofware no poco x3 pro 
 

 

[reset0]

Em 08/11/2022 em 09:53, Bruno Santana disse:

reset frp moto g8 power lite 
xt2055-2

 

 

Boa noite meu estimado. Tentei fazer um hoje somente com os botões + e -. e não foi, esse modelo só funciona fazendo o TP mesmo?