Procedimentos Remoção conta -FRP de Xiaomi MI

[Bruno Santana]

Posta apenas reset frp, conta mi 

Editado Junho 30, 2018 por Bruno Santana

[Bruno Santana]

xiaomi mi note 2 100%
feito pela umt

 

Operation    : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1F00500 [8996] 00000000
OPK_DATA    : 65D680382C4E0091ED2A1DDCD7EFD99ED328BEBDAD748E5CE177EC5AB6544AE5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8996_004.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, UFS, 64 GB
LU Count    : 6 [0x00DC7800] [0x00000400] [0x00000400] [0x00008000] [0x00114000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Mi Note 2 [msm8996]
Software    : NRD90M, V9.5.2.0.NADMIFA [Fri Apr  6 01:14:43 CST 2018]
Android Ver.    : 7.0
Patch Level    : 2018-03-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.

Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1F00500 [8996] 00000000
OPK_DATA    : 65D680382C4E0091ED2A1DDCD7EFD99ED328BEBDAD748E5CE177EC5AB6544AE5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8996_004.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, UFS, 64 GB
LU Count    : 6 [0x00DC7800] [0x00000400] [0x00000400] [0x00008000] [0x00114000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Mi Note 2 [msm8996]
Software    : NRD90M, V9.5.2.0.NADMIFA [Fri Apr  6 01:14:43 CST 2018]
Android Ver.    : 7.0
Patch Level    : 2018-03-01
Resetting FRP Lock.......Done
Operation Finished.

Editado Junho 23, 2018 por Bruno Santana

[Bruno Santana]

reset conta mi xiaomi mi 5 
feita pela umt 

Operation    : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1709400 [8996] 00000000
OPK_DATA    : 65D680382C4E0091ED2A1DDCD7EFD99ED328BEBDAD748E5CE177EC5AB6544AE5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8996_002.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : MSM8996, UFS, 64 GB
LU Count    : 6 [0x00DC7800] [0x00000400] [0x00000400] [0x00008000] [0x00114000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi MI 5 [msm8996]
Software    : NRD90M, V9.5.3.0.NAAMIFA [Thu May 24 23:16:42 CST 2018]
Android Ver.    : 7.0
Patch Level    : 2018-05-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
Module Ver. 2.4

[Bruno Santana]

reset conta mi xiaomi mi max 2 

Operation    : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1600400 [8953] 00000000
OPK_DATA    : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8953, eMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi MI MAX 2 [msm8953]
Software    : NMF26F, V9.5.5.0.NDDMIFA [Thu May 24 22:58:04 CST 2018]
Android Ver.    : 7.1.1
Patch Level    : 2018-05-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.

Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1600400 [8953] 00000000
OPK_DATA    : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8953, eMMC, 64 GB
LU Count    : 1 [0x0747C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi MI MAX 2 [msm8953]
Software    : NMF26F, V9.5.5.0.NDDMIFA [Thu May 24 22:58:04 CST 2018]
Android Ver.    : 7.1.1
Patch Level    : 2018-05-01
Resetting FRP Lock.......Done
Operation Finished.

Editado Junho 27, 2018 por Bruno Santana

[Bruno Santana]

conta mi xiaom readmi 5a primer (mdg6s)
feito pela umt 

Operation    : Reset Mi Account
Checking for existing devices...Found
Port    : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID    : E1B00600 [8937] 00000000
OPK_DATA    : 508BC7C13EB0A03EF26CDDDB1133FB5AE66C452EF49784FB3A28AB6E67DBF791
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Firehose Loader...Done
Sending Loader [8937_003.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8937, eMMC, 32 GB
LU Count    : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Redmi Note 5A [msm8937]
Software    : N2G47H, V9.5.8.0.NDKMIFA [Mon May 21 19:53:57 WIB 2018]
Android Ver.    : 7.1.2
Patch Level    : 2018-04-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
Module Ver. 2.4
Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1B00600 [8937] 00000000
OPK_DATA    : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8937_003.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8937, eMMC, 32 GB
LU Count    : 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : Xiaomi Redmi Note 5A [msm8937]
Software    : N2G47H, V9.5.8.0.NDKMIFA [Mon May 21 19:53:57 WIB 2018]
Android Ver.    : 7.1.2
Patch Level    : 2018-04-01
Resetting FRP Lock......Done
Operation Finished.
Module Ver. 2.4

 

[jeff.leand]

Bruno santana, teria algum contato para contratar seu s serviços?