Ir para conteúdo

Start Up xt1792

PauloHenriqueCCP
 Compartilhar

Posts Recomendados

PauloHenriqueCCP

PauloHenriqueCCP

Postado
Postado

Eu fiz o reparo  nele via Jtag e deu tudo  certo mais ao tentar instala o sistema da erro 

fastboot flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (256294 KB)...
OKAY [  8.079s]
writing 'system'...
(bootloader) Image s failed validation
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 8.173s

 

e no aparelho aparecer "invalid piv signed system image"

PauloHenriqueCCP

PauloHenriqueCCP

Postado
  • Autor
Postado

ele ta com a conexão  normal 
Model Settings:
Interface : eMMC
Voltage   : 2.8V
Bus Mode  : 1 bit
Bus speed : 20 MHz

Connecting...
Device       : Samsung eMMC QX13MB
Page size    : 512 B
Block size   : 512 B
Block count  : 61071360
Size         : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100515831334D4207A395022F74BF
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : QX13MB
Product revision      : 0.7
Product serial number : (hex) A395022F
Manufacturing date    : 07/2017
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX13MB_22_07_2019_17_18_57.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT              (00000000, 00000100)    128 KB
P01: sbl1             (00000100, 00000400)    512 KB
P02: rpm              (00000500, 00000200)    256 KB
P03: tz               (00000900, 00000E00)    1792 KB
P04: devcfg           (00001900, 00000100)    128 KB
P05: aboot            (00001B00, 00000C00)    1536 KB
P06: cmnlib           (00002700, 00000200)    256 KB
P07: cmnlib64         (00002900, 00000200)    256 KB
P08: keymaster        (00002B00, 00000200)    256 KB
P09: prov             (00002D00, 00000180)    192 KB
P10: sbl1bak          (00002F00, 00000400)    512 KB
P11: rpmbak           (00003300, 00000200)    256 KB
P12: tzbak            (00003700, 00000E00)    1792 KB
P13: devcfgbak        (00004700, 00000100)    128 KB
P14: abootbak         (00004900, 00000C00)    1536 KB
P15: cmnlibbak        (00005500, 00000200)    256 KB
P16: cmnlib64bak      (00005700, 00000200)    256 KB
P17: keymasterbak     (00005900, 00000200)    256 KB
P18: provbak          (00005B00, 00000180)    192 KB
P19: modem            (00005D00, 00032000)    100 MB
P20: fsc              (00037D00, 00000002)    1024 b
P21: ssd              (00037D02, 00000010)    8 KB
P22: dsp              (00037D12, 00008000)    16 MB
P23: DDR              (0003FE00, 00000040)    32 KB
P24: sec              (0003FE40, 00000020)    16 KB
P25: utags            (0003FF00, 00000400)    512 KB
P26: utagsBackup      (00040300, 00000400)    512 KB
P27: modemst1         (00040700, 00001000)    2048 KB
P28: modemst2         (00041700, 00001000)    2048 KB
P29: fsg              (00042700, 00004000)    8 MB
P30: persist          (00046700, 00010000)    32 MB
P31: frp              (00056700, 00000400)    512 KB
P32: cid              (00056B00, 00000100)    128 KB
P33: logo             (00056C00, 00008000)    16 MB
P34: carrier          (0005EC00, 00008000)    16 MB
P35: metadata         (00066C00, 00000400)    512 KB
P36: kpan             (00067000, 00004000)    8 MB
P37: boot             (0006B000, 00008000)    16 MB
P38: recovery         (00073000, 000080C8)    16.1 MB
P39: misc             (0007B100, 00000800)    1024 KB
P40: limits           (0007B900, 00000040)    32 KB
P41: mota             (0007BA00, 00000400)    512 KB
P42: dip              (0007BE00, 00000800)    1024 KB
P43: syscfg           (0007C600, 00000400)    512 KB
P44: logs             (0007CA00, 00001000)    2048 KB
P45: apdp             (0007DA00, 00000200)    256 KB
P46: msadp            (0007DC00, 00000200)    256 KB
P47: dpo              (0007DE00, 00000010)    8 KB
P48: padA             (0007DF00, 00002100)    4.125 MB
P49: sp               (00080000, 00004000)    8 MB
P50: hw               (00084000, 00004000)    8 MB
P51: oem              (00088000, 00148000)    656 MB
P52: cache            (001D0000, 00080000)    256 MB
P53: system           (00250000, 006C0000)    3456 MB
P54: userdata         (00910000, 0312DFDF)    24.59 GB
Backuping Gpt partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QX13MB_Gpt_0x0_0x100_22_07_2019_17_18_57.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 1.7.7; FW: 1.24.

fabinhoscp

fabinhoscp

Postado
Postado
25 minutos atrás, PauloHenriqueCCP disse:

ele ta com a conexão  normal 
Model Settings:
Interface : eMMC
Voltage   : 2.8V
Bus Mode  : 1 bit
Bus speed : 20 MHz

Connecting...
Device       : Samsung eMMC QX13MB
Page size    : 512 B
Block size   : 512 B
Block count  : 61071360
Size         : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100515831334D4207A395022F74BF
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : QX13MB
Product revision      : 0.7
Product serial number : (hex) A395022F
Manufacturing date    : 07/2017
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QX13MB_22_07_2019_17_18_57.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT              (00000000, 00000100)    128 KB
P01: sbl1             (00000100, 00000400)    512 KB
P02: rpm              (00000500, 00000200)    256 KB
P03: tz               (00000900, 00000E00)    1792 KB
P04: devcfg           (00001900, 00000100)    128 KB
P05: aboot            (00001B00, 00000C00)    1536 KB
P06: cmnlib           (00002700, 00000200)    256 KB
P07: cmnlib64         (00002900, 00000200)    256 KB
P08: keymaster        (00002B00, 00000200)    256 KB
P09: prov             (00002D00, 00000180)    192 KB
P10: sbl1bak          (00002F00, 00000400)    512 KB
P11: rpmbak           (00003300, 00000200)    256 KB
P12: tzbak            (00003700, 00000E00)    1792 KB
P13: devcfgbak        (00004700, 00000100)    128 KB
P14: abootbak         (00004900, 00000C00)    1536 KB
P15: cmnlibbak        (00005500, 00000200)    256 KB
P16: cmnlib64bak      (00005700, 00000200)    256 KB
P17: keymasterbak     (00005900, 00000200)    256 KB
P18: provbak          (00005B00, 00000180)    192 KB
P19: modem            (00005D00, 00032000)    100 MB
P20: fsc              (00037D00, 00000002)    1024 b
P21: ssd              (00037D02, 00000010)    8 KB
P22: dsp              (00037D12, 00008000)    16 MB
P23: DDR              (0003FE00, 00000040)    32 KB
P24: sec              (0003FE40, 00000020)    16 KB
P25: utags            (0003FF00, 00000400)    512 KB
P26: utagsBackup      (00040300, 00000400)    512 KB
P27: modemst1         (00040700, 00001000)    2048 KB
P28: modemst2         (00041700, 00001000)    2048 KB
P29: fsg              (00042700, 00004000)    8 MB
P30: persist          (00046700, 00010000)    32 MB
P31: frp              (00056700, 00000400)    512 KB
P32: cid              (00056B00, 00000100)    128 KB
P33: logo             (00056C00, 00008000)    16 MB
P34: carrier          (0005EC00, 00008000)    16 MB
P35: metadata         (00066C00, 00000400)    512 KB
P36: kpan             (00067000, 00004000)    8 MB
P37: boot             (0006B000, 00008000)    16 MB
P38: recovery         (00073000, 000080C8)    16.1 MB
P39: misc             (0007B100, 00000800)    1024 KB
P40: limits           (0007B900, 00000040)    32 KB
P41: mota             (0007BA00, 00000400)    512 KB
P42: dip              (0007BE00, 00000800)    1024 KB
P43: syscfg           (0007C600, 00000400)    512 KB
P44: logs             (0007CA00, 00001000)    2048 KB
P45: apdp             (0007DA00, 00000200)    256 KB
P46: msadp            (0007DC00, 00000200)    256 KB
P47: dpo              (0007DE00, 00000010)    8 KB
P48: padA             (0007DF00, 00002100)    4.125 MB
P49: sp               (00080000, 00004000)    8 MB
P50: hw               (00084000, 00004000)    8 MB
P51: oem              (00088000, 00148000)    656 MB
P52: cache            (001D0000, 00080000)    256 MB
P53: system           (00250000, 006C0000)    3456 MB
P54: userdata         (00910000, 0312DFDF)    24.59 GB
Backuping Gpt partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QX13MB_Gpt_0x0_0x100_22_07_2019_17_18_57.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00 
SW: 1.7.7; FW: 1.24.

amigo restaura o primeito bankup criado 

boa sorte

  • 4 semanas depois...

Participe da conversa

Você pode postar agora e se cadastrar mais tarde. Se você tem uma conta, faça o login para postar com sua conta.
Nota: Sua postagem exigirá aprovação do moderador antes de ficar visível.

Visitante
Responder

×   Você colou conteúdo com formatação.   Remover formatação

  Apenas 75 emojis são permitidos.

×   Seu link foi automaticamente incorporado.   Mostrar como link

×   Seu conteúdo anterior foi restaurado.   Limpar o editor

×   Não é possível colar imagens diretamente. Carregar ou inserir imagens do URL.

×
 Compartilhar
Ir para a lista de tópicos

  • Quem Está Navegando   0 membros estão online

    • Nenhum usuário registrado visualizando esta página.
×
×
  • Criar Novo...