Atualizações Martech Box

Link for Polish manual (english will come shortly):

Link for official RCD support forum:

Soon support for SPI and microwire memories !

Do you have unsupported radio and need our help ?

Contact us!

How to get this V1.4.0.0 ? It's simply - run rcd.exe and process of self update will begin.

Here you can download latest version of our applications:

NO LOGS ! NO CREDITS! ONCE ACTIVATED YOU CAN USE UNLIMITED !

Be READY ! For next BIG updates :-)

Martech Team

Posted Image

Tander-Cell · Julho 10, 2009

Martech RCD Service Tools V1.4.1.0

What's new supported in this version of RCD:

-VW Alpha IV by Philips vwz6z1 [i2c]

-Opel SC 202 B [sDA 2516]

-SC 202 B by Opel [sDA 2516]

-JVC KD LX 30 R [24c32]

-JVC KD LX 3 R [24c32]

-JVC KD LX 10 R [24c32]

-JVC KS LX 200 R [24c32]

-JVC KD LX 330 R [24c32]

-JVC KD LX 50 R [24c32]

-JVC KD LX 333 R [24c32]

-JVC KD LX 555 R [24c32]

-Car 300 (d) by Blaupunkt [sN]

- Support for using Martech Box II Plus / Clip as programmer for 24cXX memories.

What does it mean?

It's simply, from now you don't need any extra programmer for reading memories and use it to get codes via RCD !

How to do it?

Just connect 4 wires from Box to memory via resistors and diodes (then memory

doesn't have to be desoldered, you can also use TP on radio pcb) and read it out !

If your car radio doesn't support reading without desoldering then desolder memory,

connect cables to memory and read it out !

Unlocking car radio with Martech devices is simply and safely.

You don't need other programmers, additional tools and adapters!

Martech TEAM

Link for i2c adapter scheme:

Link for Polish manual (english will come shortly):

Link for official RCD support forum:

Soon support for SPI and microwire memories !

Do you have unsupported radio and need our help ?

Contact us!

How to get this V1.4.1.0 ? It's simply - run rcd.exe and process of self update will begin.

Here you can download latest version of our applications:

NO LOGS ! NO CREDITS! ONCE ACTIVATED YOU CAN USE UNLIMITED !

Be READY ! For next BIG updates :-)

Martech Team

Posted Image

Ary Braga · Julho 13, 2009

Martech MDM V1.8.7.5 added new models

MDM Modem Service Tools V1.8.7.5

What's new:

New models supported for unlocking:

- ZTE MF620 (BETA)

- ZTE MF626

- ZTE MF628 (BETA)

- ZTE MF636

- ONDA MDC502HS (BETA)

BETA means should work at least on one version of firmware.

If you have not supported modem then feel free to contact us.

We will not forget Martech contributors Posted Image

How to get this V1.8.7.5 ? It's simply - run mdm.exe and process of self update will begin.

www.martech.pl/forum - the best choice for professionals.

NO LOGS ! NO CREDITS! ONCE ACTIVATED YOU CAN USE UNLIMITED !

Fully standalone solution for 39 euro only !

Be READY ! For next BIG updates Posted Image

Martech Team

Ricardo Pereira · Julho 15, 2009

Martech RCD Service Tools V1.4.2.0

What's new supported in this version of RCD:

Sony CD132 MP3/CDS [sN]

Becker Traffic PRO BE 4720 [sN]

Becker Traffic PRO BE 4721 [sN]

Becker Traffic PRO BE 4723 [sN]

Becker Traffic PRO BE 4724 [sN]

Becker Traffic PRO BE 4725 [sN]

Becker Traffic PRO BE 4726 [sN]

Becker Traffic PRO BE 4730 [sN]

Becker Traffic PRO BE 4733 [sN]

Becker Traffic PRO BE 4751 [sN]

Becker Traffic PRO BE 4769 [sN]

Becker Traffic PRO SPEED BE 7820 [sN]

Becker Traffic PRO SPEED BE 7821 [sN]

Becker Traffic PRO SPEED BE 7823 [sN]

Becker Traffic PRO SPEED BE 7824 [sN]

Becker Traffic PRO SPEED BE 7825 [sN]

Becker Traffic PRO BE 7830 [sN]

- Support for using Martech Box II Plus / Clip as programmer for 24cXX memories.

What does it mean?

It's simply, from now you don't need any extra programmer for reading memories and use it to get codes via RCD !

How to do it?

Just connect 4 wires from Box to memory via resistors and diodes (then memory

doesn't have to be desoldered, you can also use TP on radio pcb) and read it out !

If your car radio doesn't support reading without desoldering then desolder memory,

connect cables to memory and read it out !

Unlocking car radio with Martech devices is simply and safely.

You don't need other programmers, additional tools and adapters!

Martech TEAM

Link for i2c adapter scheme:

Link for Polish manual (english will come shortly):

Link for official RCD support forum:

Soon support for SPI and microwire memories !

Do you have unsupported radio and need our help ?

Contact us!

How to get this V1.4.2.0 ? It's simply - run rcd.exe and process of self update will begin.

Here you can download latest version of our applications:

NO LOGS ! NO CREDITS! ONCE ACTIVATED YOU CAN USE UNLIMITED !

Be READY ! For next BIG updates :-)

Martech Team

Martech authorised distributor list:

Posted Image

Ary Braga · Julho 22, 2009

Martech RCD V1.4.3.0 21/07/2009

Martech RCD V1.4.3.0

Martech RCD Service Tools

What's new:

Grundig WKC 1630 [24c02]

Grundig WKC 1650 [24c02]

Grundig WKC 1670 [24c02]

Grundig WKC 1703 [24c04]

Grundig WKC 1704 [24c04]

Grundig WKC 1705 [24c08]

Grundig WKC 1903 [24c04]

Grundig WKC 1904 [24c04]

Grundig WKC 2670 [24c02]

Grundig WKC 2680 [24c02]

Grundig WKC 2803 [24c02]

Grundig WKC 2803A [24c04]

Grundig WKC 2804 [24c02]

Grundig WKC 2805 [24c02]

Grundig WKC 2841 [93c46]

Grundig WKC 2842 [93c46]

Grundig WKC 3650 [24c02]

Grundig WKC 3670 [24c02]

Grundig WKC 3680 [24c02]

Grundig WKC 3703 [24c04]

Grundig WKC 3705 [24c08]

Grundig WKC 3707 [24c08]

Grundig WKC 3803 [24c02]

Grundig WKC 3841 [93c46]

Grundig WKC 3860 [93c46]

Grundig WKC 3904 [24c04]

Grundig WKC 3905 [24c04]

Grundig WKC 4804 [24c02]

Grundig WKC 4805 [24c02]

Mercedes Sound 3000 [24c04]

Fiat AD 182H [24c08]

Opel SC303B [93c46]

How to get this V1.4.3.0 ? It's simply - run rcd.exe and process of self update will begin.

Here you can download latest version of our applications:

Link for i2c adapter scheme:

Link for Polish manual (english will come shortly):

Link for official RCD support forum:

NO LOGS ! NO CREDITS! ONCE ACTIVATED YOU CAN USE UNLIMITED !

Be READY ! For next BIG updates :-)

Martech Team

João Paulo Francis · Julho 24, 2009

Martech MDM First on the World

MDM Service Tools V1.8.7.7

NO LOGS ! Unlimited using just for 39euro !

Martech Modem Tools.

What's new:

1. New models supported:

- Huawei S4011 - first on the world

- ZTE 622+

- Vodafon E3735

- Vodafon K3565-Z

- .. next things will come soon Posted Image

How to get this V1.8.7 ? It's simply - run mdm.exe and process of self update will begin.

www.martech.pl/forum - the best choice for professionals.

NO LOGS ! NO CREDITS! ONCE ACTIVATED YOU CAN USE UNLIMITED !

Fully standalone solution for 39 euro only !

Be READY ! For next BIG updates :-)

Martech Team

http://forum.gsmhosting.com/vbb/showthread.php?t=793309

Reseller

Shop

Martech New Product ANALYZER

Michael Carvalho · Julho 25, 2009

Martech Analyzer PB243

From now you can also send print tests and give it to your customers.

How to do it? Just connect Analyzer to PC and user print function.

Typical tests are below, also some screens from Analyzer display :

Posted Image

Resellers welcome !

Davi Santos · Julho 27, 2009

Martech RCD V1.4.0.1

Martech RCD Service Tools V1.4.0.1

New models supported:

- Becker BE 1150 [sN]

- JVC KD LX 110 R [24c32]

- JVC KD LX 220 R [24c32]

- JVC KS RX 4400 [93c06]

- JVC KS RX 5500 [93c06]

- Mercedes Becker BE 1150 [sN]

- Sony CDX-M630 Code is entered by IR remote

- Sony CDX-M630 No Code

- VDO Dayton MS 4150 RS [i2c]

- VW Alpha CC vwz1z1 [i2c]

Remember ! You can use Martech Box II Plus / Clip as i2c programmer !

Unlocking car radio with Martech devices is simply and safely.

You don't need other programmers, additional tools and adapters!

Martech TEAM

Have you seen our latest hardware product called Martech Analyzer ?

http://martech.pl/forum/viewforum.php?f=19

Link for i2c adapter scheme:

Link for Polish manual (english will come shortly):

Link for official RCD support forum:

Soon support for SPI and microwire memories !

Do you have unsupported radio and need our help ?

Contact us!

How to get this V1.4.0.1 ? It's simply - run rcd.exe and process of self update will begin.

Here you can download latest version of our applications:

NO LOGS ! NO CREDITS! ONCE ACTIVATED YOU CAN USE UNLIMITED !

Be READY ! For next BIG updates :-)

Martech Team

Tander-Cell · Julho 29, 2009

Martech Analyzer update on 29/07/2009

- ability of battery regenerating added

- chineese Manual

It looks as following:

1. you connect the battery

2. you select proper settings from menu

3. you start the process.......... Posted Image

and it's ready

a detailed description is to be found in the manual

- In English: http://martech.pl/download/ANALYZER/..._manual_en.pdf

- In Polish: http://martech.pl/download/ANALYZER/..._manual_pl.pdf

- IN China: http://martech.pl/download/ANALYZER/...al_chinese.pdf

Martech Shop: http://martech.pl/eshop/

Sales department contact:

alcatel@martech.pl Icq: 471764678 sonork 100.110305

Martech Team

http://martech.pl/download/ANALYZER/APC_v10_EN.exe

Ricardo Pereira · Julho 31, 2009

Martech Analyzer Update 31.07.2009

New functions added:

- Analyzer Print Client (APC) released.

This is special PC application which allow to print test directly from PC.

APC works with PB232 Analyzer, supporting printing test raports and summaries.

Currently supported two modes for printing :

- printing test from the function which analyze link resistance (this consist from

electrical resistance of link and its ionic resistance)

- printing test from regenerate / forming process

Other options:

- printing tests is improved

- special functions to add company name on print test header

- APC is available in English and Polish (more will come, if you havel

questions then feel free to contact technical support at support@martech.pl).

APC is available in English and Polish language.

We will add special module to induce Li-Jon batteries soon.

Firwmare Updater new version:

- corrected bug connected to unstable measurement on external temperature driver

- the range of initial charge and discharge current is increased

- regenerate function is amplified to PreForming and PostForming

APC v1.0 EN:

APC v1.0 PL:

http://martech.pl/download/ANALYZER/APC_v10_PL.exe

Firmware Updater :

http://martech.pl/download/ANALYZER/...43_0003_EN.exe

We are waiting for comments and replies.

Be READY ! For next BIG updates Posted Image

Martech Team

SPECIAL Thanks goes to Klakier & DoktorT !!

Posted Image

New functions added:

- Analyzer Print Client (APC) released.

This is special PC application which allow to print test directly from PC.

APC works with PB232 Analyzer, supporting printing test raports and summaries.

Currently supported two modes for printing :

- printing test from the function which analyze link resistance (this consist from

electrical resistance of link and its ionic resistance)

- printing test from regenerate / forming process

Other options:

- printing tests is improved

- special functions to add company name on print test header

- APC is available in English and Polish (more will come, if you havel

questions then feel free to contact technical support at support@martech.pl).

APC is available in English and Polish language.

We will add special module to induce Li-Jon batteries soon.

Firwmare Updater new version:

- corrected bug connected to unstable measurement on external temperature driver

- the range of initial charge and discharge current is increased

- regenerate function is amplified to PreForming and PostForming

APC v1.0 EN:

http://martech.pl/download/ANALYZER/APC_v10_EN.exe

APC v1.0 PL:

http://martech.pl/download/ANALYZER/APC_v10_PL.exe

Firmware Updater :

http://martech.pl/download/ANALYZER/...43_0003_EN.exe

We are waiting for comments and replies.

Be READY ! For next BIG updates http://forum.gsmhosting.com/ubb/smile.gif

Martech Team

SPECIAL Thanks goes to Klakier & DoktorT !!

http://martech.pl/download/ANALYZER/photos/APC_EN_0.jpg

http://martech.pl/download/ANALYZER/photos/APC_EN_1.jpg

http://martech.pl/download/ANALYZER/photos/APC_EN_2.jpg

http://martech.pl/download/ANALYZER/photos/APC_PL_02.jpg

http://martech.pl/download/ANALYZER/photos/APC_PL_03.jpg

http://martech.pl/download/ANALYZER/photos/PB243_Analyzer_Updater_0.jpg

http://martech.pl/download/ANALYZER/photos/PB243_Analyzer_Updater_1.jpg

http://martech.pl/download/ANALYZER/photos/PB243_Analyzer_Updater_2.jpg

http://martech.pl/download/ANALYZER/analyzer.jpg

Ary Braga · Agosto 3, 2009

Martech BIG Update 03/08/2009

Martech RCD Service Tools V1.5.0.0

New code calculators :

- Renault calculator (so called precode for Philips and VDO in Reanult cars,

works on very big range of types from 2000 up to 2009 year)

- Grunding calculator (various models)

- Philips calculator (various models)

Posted Image

How to use?

- for Renault radio you must put 1 alphabetic and 3 numeric characters (like V123)

- for Philips & Grunding you must put 7 alphabetic and 7 numeric characters

You can calc only 2 codes per day for above models.

You must be connected to internet while code calculating.

Why there is limitation for 2 codes daily?

It's beacuse of some irresponsible users which are putting free codes around the net.

They ruins and destroys investment of honest users.

Some facts about RCD Service Tools

- supports over 2000 various types via SN

- supports almost 600 various via bin file !

Remember ! You can use Martech Box II Plus / Clip as i2c programmer !

Unlocking car radio with Martech devices is simply and safely.

You don't need other programmers, additional tools and adapters!

Martech TEAM

Do you have unsupported radio and need our help ?

Contact us!

How to get this V1.5.0.0 ? It's simply - run rcd.exe and process of self update will begin.

Be READY ! For next BIG updates Posted Image

Martech Team

http://www.multi-com.pl/index.php/en...ategories.html

Ricardo Pereira · Agosto 6, 2009

Martech XC1 Adapter

Adapter XC1 for Martech Analyzer it's battery adapter for new released power supply/battery tester from Martech that allows you easy and fast connect any battery for performing regneration procvess, charge, test or discharge batetry. Adapter was created with coolaboration with Martech Team and are fully supported with PB243 device - using dedicated temperature control unit for measure battery temperature while process running to not allow overload and burn battery.

Specification:

- build in temperature control unit for Martech Anaylzer

- cage for battery are easly adjusted to match yoru batteries

- max size of battery tested (cage dimmension): 85mm x 85mm

- max height of battery tested (cage dimmension): 28mm

NOTE: Height as lenght of battery can be bigger that adapter area - int this situation it will be over workign area of adapter. This can happend while testign big batteries as camera unit etc.

Posted Image

Ary Braga · Agosto 7, 2009

Martech Analyzer V00.04

Firmware v 00.04 has been supplemented with:

- amendments in energy governing PowerDown mode_

- amendments within Discharge Mode

- functions of evoking Lit battery chemistry (Review) in the area of Charging Mode

- Batteries of Lit chemistry are fitted with supervising links work electronics

- Those systems, among others protect the lin ks against their discharging

It is stated that allowed discharging threshold is 3V per one link-

- after exceeding this threshold, the battery electronics disconects the battery exit, which results as a zero voltage of such a battery

Some batteries have got electronics which limits the link possibilities which results strongly lowered initial voltage.

Such batteries are able to stillbe used, they sould only be stimulated in a proper way.

How do the stimulating links functions work?- Reviev in PB243: PB 243 Analyzer as a standard, after detecting too low amperage or lack

of battery, shows the following info:"Too Low Battery Voltage"

"Check Battery Connection"- in case of connecting battery with cramps in incorrect way

Posted Image

or " Discharging Error"Check Battery Settings"- in cas eof coonecting wrong battery type

Posted Image

In a lowe verse of alerts:

"Press Flash to Reviev..."

"Press Esc to exit mode..."

The same messages may appear if we have the battery demanding stimulation

At this point, if we are not sure of correct battery connection as well as correct settings, we press the upper button with a

charging icon (Flash)- and the process of stimulation will start, which is going to be confirmed with a message ""Reviving Process".

Posted Image

The reviving proces take splace until the battery voltage reaches the value of at least 3V/ link with an amperage between the range of 50...250mA.

The reviving process has been qdeveloped due to links security.

After reaching the voltage threshold, the analyzer will conduct the usual charging cycle with the parameters declared in Settings window.

Empirical research show that the whole reviving process is different and it depends on links condition, although it has never lasted longer than 12 minutes.

We advise against the battery reviving using" short connection" method, uncontrolled electricity results in ofen damages of battery chemistry.

Because we owe a limited amount of damaged batteries, we ask for opinions regarding analyzer functioning.

All your remarks as well as suggestions ae welcomed at support@martech.pl or at a suitable section on our forum

Best Regards

Martech Team

Ary Braga · Agosto 8, 2009

Martech Cars 08/08/2009

Martech RCD v1.5.2.0

What's new supported in this version of RCD:

VW Beta V by Philips vwz6z2 [i2c]

VW RCD 200 by Delco vwz4z4 [24c16]

VW Delta 6 by Delco vwz4z4 [24c16]

Becker Carminat BE 7406 [sN]

Philips CCR 800 [sN]

Renault RENRDW 100-xx [sN]

Renault 22DC259 [24c32]

Mercedes Sound 10 by Alpine [24c04]

Mercedes MF 2297 by Apline [24c02]

KIA AUA 8516 [24c01]

Some facts about RCD Service Tools

- supports over 2000 various types via SN

- supports almost 600 various via bin file !

Martech SQM v1.0.0.6

What's new supported in this version of SQM:

Quad Iinhai 300 [24c02]

Full supported models list: http://martech.pl/download/RCD/rcd_supported.txt

Martech Shop: http://martech.pl/eshop/

Link for official RCD support forum: http://martech.pl/forum/viewforum.php?f=21

Remember ! You can use Martech Box II Plus / Clip as i2c programmer !

Unlocking car radio with Martech devices is simply and safely.

You don't need other programmers, additional tools and adapters!

Do you have unsupported radio and need our help ?

Contact us!

How to get this V1.5.2.0 ? It's simply - run rcd.exe and process of self update will begin.

NO LOGS ! NO CREDITS! ONCE ACTIVATED YOU CAN USE UNLIMITED !

Be READY ! For next BIG updates :-)

Martech Team

Ary Braga · Agosto 10, 2009

VSZ Service Tools V1.6.0.0

What's new

New models supported for unlocking:

- Vodafone 715

- Vodafone 716

- Vodafone 720

- Vodafone 725

- Vodafone 810

- Vodafone 830

- Huawei U120

- Huawei U120E

- Huawei U120 (Plusfon)

- Huawei U120s

- Huawei U121

- Huawei U121 (Playset)

- Huawei 603i (Plusfon)

- .. next models will come soon :-)

How to get this V1.6.0.0 ? It's simply - run vsz.exe and process of self update will begin.

Or download and run:

www.martech.pl/forum - the best choice for professionals.

NO LOGS ! NO CREDITS! ONCE ACTIVATED YOU CAN USE UNLIMITED !

Fully standalone solution for 39 euro only !

Be READY ! For next BIG updates

Martech Team

Davi Santos · Agosto 11, 2009

Martech RCD Service Tools V1.5.3.0

New functions:

- CD-CHANGER

This bookmark allowed you to read code from your car cd-changers.

You will be able to read code, turn it off and reset time tries.

All functions depends on model, for now supported:

- CDC 2 by Blaupunkt [HC05x32]

- CDC 3 by Philips [24c64]

Do you have any unsupported cd changer ? Contact US !

What about unlocking car NAVIgations ? Yeah, we will working on it for our customers, too !

There is new i2c adapter for RCD, look:

The price is really good as for it possibilites..

Remember ! You can use Martech Box II Plus / Clip as i2c programmer !

Unlocking car radio with Martech devices is simply and safely.

You don't need other programmers, additional tools and adapters!

How to get this V1.5.3.0 ? It's simply - run rcd.exe and process of self update will begin.

Be READY ! For next BIG updates :-)

Martech Team

Ary Braga · Agosto 12, 2009

Martech MDM 12.08.09 - new cards supported

MDM Modem Service Tools V1.8.8.5

What's new:

New models supported for unlocking:

- Huawei E155x

- Huawei E1612 First in the world

- Huawei E1615 First in the world

- Huawei E1616 First in the world

If you have not supported modem then feel free to contact us.

We will not forget Martech contributors

How to get this V1.8.8.5 ? It's simply - run mdm.exe and process of self update will begin.

www.martech.pl/forum - the best choice for professionals.

NO LOGS ! NO CREDITS! ONCE ACTIVATED YOU CAN USE UNLIMITED !

Fully standalone solution for 39 euro only !

Be READY ! For next BIG updates

Martech Team

Ary Braga · Agosto 14, 2009

Martech RCD V1.5.4 Navi Unlocking 14/08/09

Martech RCD Service Tools V1.5.4.0

What's new ?

- Unlocking various types of CAR NAVI systems like BNO, MCD, MFD, MFD2, DX, PLUS.

How to use?

- first check your model on label sticker, then download correct instruction from support manager

- connect three wires to navi pcb, connect power supply to navigation

- turn on navigation, connect cable to Martech Box/Clip and send one of possible codes

- RCD will do autorecognition where to put new code

- voila, your navi has got new code choosen by you.

Supported models:

- Navigation 1M0 035 191 A [24C32]

- Navigation 3B0 035 186 D [24C32]

- Navigation 3B0 035 186 C [24C32]

- Navigation MFD 3B0 035 191 D [24C32]

- Navigation 4B0 035 192 F [24C32]

- Navigation 4B0 035 192 H [24C32]

- Navigation 4B0 035 192 K [24C32]

- Navigation 4B0 035 192 L [24C32]

- Navigation 4B0 035 192 M [24C32]

- Navigation 4D0 035 192 M [24C32]

- Navigation 4D0 035 192 H [24C32]

- Navigation 7M5 035 191 A [24C32]

- Navigation 7M0 035 191 H [24C32]

- Navigation 8L0 035 192 F [24C32]

- Navigation 8E0 035 192 B [24C32]

- Navigation 1J0 035 152 G [24C32]

- Navigation 1T0 035 194 A [24C32]

- Navigation 1T0 035 194 B [24C32]

- Navigation 1T0 035 095 [24C32]

- Navigation 1T0 035 195 [24C32]

- Navigation 7L6 035 186 A [24C32]

- Navigation 7L6 035 191 C [24C32]

- Navigation 7L6 035 191 [24C32]

- Navigation 7H0 035 191 F [24C32]

- Navigation 3B0 035 186 C [24C16]

- Navigation 3B0 035 191 [24C16]

- Navigation 4B0 035 192 A [24C16]

- Navigation 4B0 035 192 E [24C16]

- Navigation 4D0 035 192 C [24C16]

- Navigation 4D0 035 192 E [24C16]

- Navigation 8D0 035 192 D [24C16]

Remember ! You can use Martech Box II Plus / Clip as i2c programmer !

Unlocking car radio with Martech devices is simply and safely.

You don't need other programmers, additional tools and adapters!

Martech TEAM

Do you have unsupported radio and need our help ?

Contact us!

How to get this V1.5.4.0 ? It's simply - run rcd.exe and process of self update will begin.

Be READY ! For next BIG updates :-)

Martech Team

Ary Braga · Agosto 22, 2009

Martech RCD V1.5.5

Martech RCD Service Tools V1.5.5.0

What's new ?

- Clarion PP 1675 H [93c46]

- Mazda 6 CR YM 4272 KA [93c46]

- Renault RENRNC 571-16 [sN]

- Seat Altea SE 359 MP3 LHD SEZ1Z1 [95640]

- Seat Altea SE 359 MP3 Bril LHD SEZ1Z3 [95640]

Remember ! You can use Martech Box II Plus / Clip as i2c programmer !

Unlocking car radio with Martech devices is simply and safely.

You don't need other programmers, additional tools and adapters!

Posted Image

Easy i2c adapter:

Posted Image

With RCD you can :

- calculater Renault codes, disable lock in Opel CD XX radios, unlock

many various by serial number [sN] and much more by eeprom memory !

Martech TEAM

Do you have unsupported radio and need our help ?

Contact us!

How to get this V1.5.4.0 ? It's simply - run rcd.exe and process of self update will begin.

Be READY ! For next BIG updates :-)

Martech Team

Tander-Cell · Agosto 23, 2009

MDM Modem Service Tools V1.8.9.0

What's new:

New models supported for unlocking:

- ZTE MF100

- ZTE MF622+ supported for new versions

- .. next things will come soon :-)

If you have not supported modem then feel free to contact us.

We will not forget Martech contributors

How to get this V1.8.9.0 ? It's simply - run mdm.exe and process of self update will begin.

www.martech.pl/forum - the best choice for professionals.

NO LOGS ! NO CREDITS! ONCE ACTIVATED YOU CAN USE UNLIMITED !

Fully standalone solution for 39 euro only !

Be READY ! For next BIG updates

Martech Team

Ricardo Pereira · Agosto 26, 2009

MDM Modem Service Tools V1.8.9.2 26/08/2009

What's new:

New models supported for unlocking:

- Huawei E1820

- Huawei E1808

- Huawei UMG181

- Possibility to unlock Huawei modems which aren't on supported list !

How to do it?

Use MDM to read info and do unlock directly from MDM.

Might works on various new models not listed in our tool.

- .. next things will come soon :-)

Posted Image

If you have not supported modem then feel free to contact us.

We will not forget Martech contributors !

How to get this V1.8.9.2 ? It's simply - run mdm.exe and process of self update will begin.

www.martech.pl/forum - the best choice for professionals.

NO LOGS ! NO CREDITS! ONCE ACTIVATED YOU CAN USE UNLIMITED !

Fully standalone solution for 39 euro only !

Be READY ! For next BIG updates

Martech Team

Ricardo Pereira · Agosto 26, 2009

Martech RCD Service Tools V1.5.6.0

What's new ?

Fiat 223 MP3 [95320]

Volvo CR 504 [93c46]

Volvo CR 591 [s2914]

Volvo CR 815 [24c01]

Volvo SC 813 [24c01]

Volvo CR 602 [24c02]

Philips 22DC511 [24c02]

Volvo VC 601 [24c02]

Remember ! You can use Martech Box II Plus / Clip as i2c programmer !

Unlocking car radio with Martech devices is simply and safely.

You don't need other programmers, additional tools and adapters!

Posted Image

With RCD you can :

- calculater Renault codes, disable lock in Opel CD XX radios, unlock

many various by serial number [sN] and much more by eeprom memory !

Martech TEAM

Do you have unsupported radio and need our help ?

Contact us!

How to get this V1.5.6.0 ? It's simply - run rcd.exe and process of self update will begin.

Be READY ! For next BIG updates :-)

Martech Team

Ricardo Pereira · Agosto 27, 2009

Martech RCD Service Tools V1.5.9.0

New models supported:

'Philips 22DC964 [24C16]'

'Philips 22DC983 [24C04]'

'Philips 22DC982 [24C04]'

'Philips 22DC379 [24C04]'

'Philips 90RC438 [24C04]'

'Philips 22DC349 [24C04]'

'Philips 90RC408 [24C04]'

'Philips 22DC229 [24C32]'

'Philips 22DC239 [24C32]'

'Philips 22DC259 [24C32]'

'Philips 22DC279 [24C32]'

'Philips 22RC465 [24C32]'

'Philips 22DC277 [24C32]'

'Philips 22RC260 [24C32]'

'Philips 22DC607 [24C04]'

'Philips 22DC449 [24C16]'

'Philips 22DC451 [24C16]'

'Philips 22DC461 [24C16]'

'Philips 22DC459 [24C16]'

'Philips 22DC479 [24C16]'

'Philips 22DC481 [24C16]'

'Philips 22DC594 [24C16]'

'Philips to Landrover [24C16]'

Remember ! You can use Martech Box II Plus / Clip as i2c programmer !

Unlocking car radio with Martech devices is simply and safely.

You don't need other programmers, additional tools and adapters!

With RCD you can :

- calculater Renault codes, disable lock in Opel CD XX radios, unlock

many various by serial number [sN] and much more by eeprom memory !

http://forum.gsmhosting.com/vbb/forumdisplay.php?f=571

How to get this V1.5.9.0 ? It's simply - run rcd.exe and process of self update will begin.

New Product Martech Team ANALYZER

a detailed description is to be found in the manual

- In English: http://martech.pl/download/ANALYZER/..._manual_en.pdf

- In Polish: http://martech.pl/download/ANALYZER/..._manual_pl.pdf

- IN China: http://martech.pl/download/ANALYZER/...al_chinese.pdf

Be READY ! For next BIG updates :-)

Martech Team

Martech Shop: http://martech.pl/eshop/

Ricardo Pereira · Agosto 27, 2009

MDM Modem Service Tools V1.8.9.5

What's new:

New models supported for unlocking:

-ZTE MF330

-ZTE MF616

-ZTE MF630

-ZTE MF633

-ZTE MF633+

-ZTE MF635

-ZTE MF637

-ZTE MF637U

- Possibility to unlock ZTE modems which aren't on supported list !

How to do it?

Use MDM to read info and do unlock directly from MDM.

Might works on various new models not listed in our tool.

- .. next things will come soon :-)

If you have not supported modem then feel free to contact us.

We will not forget Martech contributors !

http://forum.gsmhosting.com/vbb/forumdisplay.php?f=571

How to get this V1.8.9.5 ? It's simply - run mdm.exe and process of self update will begin.

New Product Martech Team ANALYZER

a detailed description is to be found in the manual

- In English: http://martech.pl/download/ANALYZER/..._manual_en.pdf

- In Polish: http://martech.pl/download/ANALYZER/..._manual_pl.pdf

- IN China: http://martech.pl/download/ANALYZER/...al_chinese.pdf

Martech Team